Micro Effects Dimmer LED Lighting Control Strobe Flash Blink 5 12 24 Volt MED1-B

• Popularity - 12676 views, 1810.9 views per day, 7 days on eBay. Super high amount of views. 186 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

The P/N MED1 Micro Effects Dimmer provides dimming, multimode effects, and on / off control of 5 – 24 volt DC LED lights.<br>The unit features a simple tactile three button interface; Light, Speed, and Mode.<br>The variety of effects combined with the simplicity of use makes this a great control for low complexity projects.<br>The Light button<br>is used in static mode for dimming. Note the Static (0 mode) dimming function is between effects #8 and #1 when sequencing through the modes.<br>The Speed (On/Off) button<br>provides ten speed levels for the effects modes and is also used to turn the unit off when it is held longer than 3 seconds.<br>The Mode button<br>provides eight dynamic effects, and the Static (0 mode) between effects #8 and #1.<br>Mode effects patterns<br>0) Static mode for dimming<br>1) Up / Down – ramp up on ramp down off – repeat<br>5) Blinking – long on<br>2) Up / Down – flame flicker – always on<br>6) Flash - burst of pulses (emergency vehicle light)<br>3) Strobe – fast<br>7) Strobe – slow (beacon light)<br>4) Blinking – long off<br>8) Up / Down varying brightness – brief off – repeat<br>The MED1 body measures a nominal 1.4” length, 0.6” wide and 0.2” thickness.<br>Each of the connector cables extends from the body 5.5”.<br>The overall end to end length of the entire body and cable assembly is 13.0” Max.<br>The unit’s body is sleeved in black and the cables are molded in black PVC.<br>Well suited for various LED lighting applications such as:<br>Flex Strip accent lighting<br>Promotional LED signs<br>Specialized décor lighting<br>F/X prop and costume lighting<br>Stage Lighting<br>Theatrical effects lighting<br>POS Point Of Sale displays<br>Architectural accent lighting<br>The MED1 operates with 5, 9, 12 or 24 volt DC lighting systems and can switch a maximum of 4 amps. The unit provides up to 20 watts of lighting control when using a 5 volt system, 48 watts on 12 volt or up to 96 watts of lighting on a 24 volt system.<br>The control may be operated from a 9 volt battery for portable applications, it is recommended to limit the LED light load current to 100ma for battery life.<br>The MED1 is equipped with a barrel connector type DC power jack and plug. The connectors are of the 5.5mm x 2.1mm size with a positive center connection. The body of the MED1 control is of a small size with a low profile. The MED1 body measures a nominal 1.4” length, 0.6” wide and 0.2” thickness.<br>Each of the connector cables extends from the body 5.5”.<br>The overall end to end length of the entire body and cable assembly is 13.0” Max.<br>The unit’s body is sleeved in black and the cables are molded in black PVC.<br>